Duct Accessories

  • Home
  • Duct Accessories
DUCT ACCESSORIES
Duct Mandrel-steel

Heavy Duty Duct Mandrel with pulling eyes on each end for removing obstructions from the duct. Body made of mild steel

TRADING

Duct Mandrel-Nylon

Duct Mandrel with pulling eyes on each end for removing obstructions from the duct. Body made of nylon ball Mandrels to be used at the ends.

TRADING

Cable Pulling Lubricant

This is recommended for long pulls, high shear situations and multiple bend pulls. It leaves a lubricating film after its water has evapo rated

TRADING

Heavy Duty Wire Brush Mandrel

Heavy Duty wire brush mandrel with pulling eyes on each end for removing obstructions from the duct.

TRADING

DUCT PLUG 1" (32MM) PULLING EYE TYPE

Duct plug are used to close and tighting the sub duct and mini duct end. Water-tight and gas-tight Removable and reusable

TRADING

DUCT PLUG 38MM PULLING EYE TYPE

Duct plug are used to close and tighting the sub duct and mini duct end. Water-tight and gas-tight Removable and reusable

TRADING

DUCT PLUG 4 " (110MM) PULLING EYE TYPE

Duct plug are used to close and tighting the sub duct and mini duct end. Water-tight and gas-tight Removable and reusable

TRADING

DUCT PLUG 6 " (160MM) PULLING EYE TYPE

Duct plug are used to close and tighting the sub duct and mini duct end. Water-tight and gas-tight Removable and reusable

TRADING

ANCHOR BLOCK 4 X 32MM X 110MM , OPEN TYPE, RED COLOR

Anchors and organizes subducts or multiple duct systems • Eliminates duct-edge abrasion to cables • Excellent for supporting cables at the tops of risers • Expandable gasket allows for expansion and contraction of cables or subducts without leakage • Split design for retrofitting without disassembly

TRADING

SIMPLEX PLUG 32MM

Water-tight and air-tight * Simple installation around in-place cables * Seals all types of inner duct * Easy to retrofit . Wide cable sealing range " Installs and removes by hand

TRADING

SIMPLEX PLUG 38MM

Water-tight and air-tight * Simple installation around in-place cables * Seals all types of inner duct * Easy to retrofit . Wide cable sealing range " Installs and removes by hand

TRADING

MICRO DUCT COUPLER SIZES : 5/3.5mm, 7/3.5mm, 7/4mm, 8/3.5mm, 8/5mm, 10/8 mm, 12/10mm, 14/10mm, 16/12mm, 16/14mm, 20/16mm

The Push-Fit Connectors make splicing MicroDuct fast and easy. Simply push the MicroDucts into the center of the coupling. No tools are required. The coupler can be connected and disconnected 10 times and still maintain the high performance requirements for air blown installation systems.

TRADING

MICRO DUCT END CAP SIZES : 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 20 mm

To keep MicroDuct networks free of debris, seal the system with Push-Fit End Caps. With the same functionality as the Push-Fit Connectors, installation simply involves pushing the MicroDuct into the End Cap. The End Cap can be attached and removed 10 times while still maintaining the same high performance characteristics.

TRADING

MICRO DUCT THREADED COUPLING, GREY COLOR SIZES : 20MM, 25MM, 28MM, 32MM, 40MM, 50MM

PP coupling are used to joint the pipes & subducts in threaded manner

TRADING

MICRO DUCT END CAP, GREY COLOR SIZES : 20MM, 25MM, 28MM, 32MM, 40MM, 50MM

PP coupling are used to joint the pipes & subducts in threaded manner

TRADING

Other Products