Material: Concrete, conforming to BS 5328 In highways or roads as a permanent marker post for direct buried fibre optic cable routes.
Material: Polyethylene, conforming to ASTM D 1248 In highways, air ports or roads as a permanent marker post for direct buried FOC or secondary cable routes. It bends upon being hit and returns to normal position afterwards.
Material: Wood In vacant lots or undeveloped sites as a temporary marker for buried secondary cable routes and bagged/buried service wires.
Hot Dip Galvanized (BS 729), steel. Two type of anchors for flexible marker post cylindrical for concrete and other one-soil type anchor flattened at one end to facilitate driving into soil.
Material: PVC Identification characters and symbols, used to identify cables in manholes
Material: Marking Paint is multi-purpose enamel paint. It is usually applied via aerosol cans. Finish: Gloss Used for general marking requirements i.e. marking location numbers on distribution points and cabinets
Stencil, Punch Set is a hand-held hammer struck tool set, consists of 26 letters, 10 digits all in a rigid plastic box Use: Used to mark aluminum plates for identification of wall distribution points, cabinets, manholes, etc…
Used for Marking & Identification of telecom electrical cables and equipments
Permanent, waterproof marker pens for most surfaces
Standard round style cable clip with captive hardened steel pin
Material: Made of pure Aluminum (1mm) one side laminated with PE sheet. Installed in the manhole entrance, marker post, distribution points etc… for marking purposes.
Material: mild steel Finish: Hot Dip Galvanized (BS 729) Used to protect cables, wires and joints running vertically along the sides of poles, walls and other structures.
Material: mild steel Finish: Hot Dip Galvanized (BS 729) Used to secure u guard steel
Material: Plastic Plastic U Shaped channel used to cover exposed buried service wires on walls, poles etc.
Material: Mild Steel Used for protecting telecom cabinets and telephone booths from vehicular damage.